"Assume a completely frictionless surface." How many times did we see that statement in our high-school physics class? And how many times did we wonder why our teachers were so eager to have us live in a fantasy world? Now, thanks to a group of scientists known as tribologists, the prospect of eliminating friction between two interacting surfaces is fast becoming a reality.
It's being done in interesting ways, too. For example, a team of researchers at Harvard University studied the carnivorous pitcher plant's leaves, which feature microscopic ridges that trap a layer of liquid nectar between them. The surface is so slippery that insects landing on the leaves slide off and fall into deep, pitcher-shaped pouches, where enzymes gobble them up. Back in the lab, the researchers duplicated the slippery slope of the pitcher plant by creating a random network of water-repellent nanoposts and Teflon-coated nanofibers and then soaking them in a fluorine-rich liquid. The liquid formed a layer between the nanostructures, preventing water and other materials from flowing between them and creating a nearly nonstick surface.
Biofilms -- tapestries of microbes such as bacteria or fungi growing attached to a solid substrate -- cause loads of problems for health care providers. According to the National Institutes of Health, biofilm formation accounts for 65 percent of all human microbial infections [source: Ames]. You might think that fastidious cleaning is the answer to the problem, but biofilms stubbornly resist scrubbing. They also tend to shrug off the effects of antibiotics. The better solution involves preventing bacteria from attaching to a substrate in the first place. Hello, frictionless surface!
A biofilm begins its life when a few carefree microorganisms cruise by a countertop or surgical instrument and stick, either by way of gluey adhesion molecules or structures known as pili. Once attached, this small group of cells secretes an extracellular polymeric substance, or EPS, which acts like cement to hold the cells -- and their progeny -- permanently in place. But if you can interrupt the attachment process, you can stop the biofilm from forming.
That's exactly what a team of scientists from the University of Nottingham in the U.K. have done. By coating laboratory surfaces and medical devices such as catheters with an acrylate polymer similar to those used in the plastics industry, the researchers were able to prevent bacteria trailblazers from getting a toehold. The result: They found a 97 percent reduction in coverage of the Staphylococcus aureus bacterium [source: Ames].
In the 1970s, Heinz built an entire advertising campaign around its super-thick, friction friendly ketchup. The campaign borrowed Carly Simon's hit "Anticipation" and extolled the virtues of a "taste that's worth the wait."
Apparently, the food-service industry doesn't think the waste is worth the wait. Ketchup, mustard, mayonnaise and barbecue sauce that can't be coaxed from bottles mean lost revenue to restaurant owners and families trying to stretch their grocery budgets. About 1 million pounds (453,592 kilograms) of stuck-on sauces and dressings get thrown out each year worldwide, according to the Varanasi Research Group, a team of mechanical engineers and nanotechnologists at the Massachusetts Institute of Technology. Then there's the issue of the big cap required to get condiments out of squeeze bottles. Eliminating the need for such a big cap would reduce how much plastic goes into a single bottle, which could keep 25,000 tons of petroleum-based products out of the waste stream each year [source: LiquiGlide].
The same condiment-crazy MIT team has a solution: coat the inside of bottles with a unique material that prevents ketchup, mayonnaise or any other type of sauce from sticking to the surface. Most similar coatings contain nanolubricants you might not want to ingest, but the Cambridge folks developed a food-safe material that they say is completely tasteless and nontoxic. They call it LiquiGlide and describe it as a "structured liquid" -- rigid like a solid, but slippery like a liquid. Smear the inside of a condiment bottle with LiquiGlide, and the contents slide out like, well, poop from a goose.
Engineers have obsessed over submarine design for more than 200 years, but they've been unable to eliminate one of its most vexing problems -- friction drag, a force that opposes forward motion as water sticks to the surface of the outer hull. According to some estimates, this "skin friction" accounts for roughly 65 percent of the drag on submarines [source: Pike].
One solution? A polymer ejection system. In such a system, polymer is stored in a tank and then ejected through a series of ports as the submarine moves. The polymer flows over the surface and reduces the interaction of water molecules with the surface. Unfortunately, the system also increases the weight of the vessel.
Now scientists may have a better trick: coat submarines with a nonstick surface made from a revolutionary nanotechnology. The material doesn't look extraordinarily special to the naked eye. But if you view it under a microscope, you see that it contains tiny needles spaced just a couple millionths of a meter apart. The needles rest, like a layer of grass, on a surface of Teflon. When water hits the material, it encounters air trapped in the spaces between the needles. And this makes the material extremely slippery -- 99 percent less sticky than a normal Teflon surface without the nano-sized needles [source: BBC News].
Submarines coated in the nanotechnology would have far less friction drag and would require less fuel to propel them. And, yep, a raincoat made from the same material would protect you far better than the most expensive London Fog trench coat.
Airplane wings provide a significant amount of lift -- as long as they maintain their factory shape. Coat a wing with even a thin layer of snow or ice, however, and you disrupt its ability to keep a plane in the air. In fact, by some estimates, ice buildup can reduce lift by as much as 25 percent, which is why ground and flight crews worry so much about deicing during wintertime air travel [source: Kaydee].
The tried-and-true method to remove ice involves a three-step strategy. During the first step, deicing, airport ground crews spray a hot solution of glycol and water on an airplane's wings. This melts existing ice but does little to prevent new ice from forming. Accomplishing this requires an anti-icing step and a second type of fluid, which contains more glycol and an additional additive to make it cling to the wing surface during takeoff. Once an aircraft reaches its cruising altitude, liquids become less effective in the fight against frozen precipitation. Jet pilots solve the problem by diverting some heat from the engines to piping in the wings. Pilots of propeller-driven planes rely on rubber boots that inflate and deflate to knock ice from the wings and tail.
But what if you could build a plane with a surface so smooth that ice fails to form in the first place? Several types of nanotechnology may soon make this a reality. Scientists from GE Global Research have developed a nanotextured, superhydrophobic (or water-repellent) coating that dramatically reduces ice adhesion on wing surfaces. And a team at North Carolina State University is experimenting with a nonstick polymer that works together with an elastic substrate. The polymer gets applied to the substrate when the elastic material is stretched slightly. When the tension is relieved, the substrate pulls the polymer molecules together into a superdense configuration. Airplane wings coated with the friction-free polymers resist being coated by anything -- even ice.
It's unlikely that graffiti artists will appear on the FBI's Ten Most Wanted Fugitives list, but cities and municipalities take this particular kind of vandalism very seriously. Chicago spent $4.1 million in 2012 on its anti-graffiti program and, in 2011, removed 137,459 instances of spray-painted artwork from bridges, buildings and signs [source: Novak]. In Los Angeles, the problem -- and the necessary budget to address it -- is even bigger. That's a lot of money and man power that could be directed to other social services and city programs.
Graffiti-cleaning crews use a variety of techniques to sponge away illicit artwork -- overpainting, chemical removal and power washing. Unfortunately, some of these methods can produce a bigger eyesore than the vandalism itself. Enter the graffiti-repelling wall, which features a nonstick material that either resists paint adhesion or makes removal far easier because the paint doesn't interact with the protected surface. Scientists have fashioned one such material to mimic the leaves of the lotus flower. The surface of these leaves bear an intricate array of microscopic ridges coated in wax. The ridges trap air between them and, as a result, water falling onto the leaf forms individual droplets that simply roll off. A wall or sign coated in such a material -- a nanostructure built in the lab but inspired by nature -- would foil graffiti artists and probably make city mayors very, very happy.
Some people love washing their cars, but many folks would appreciate having the fresh-from-the-showroom look without all of the effort. And don't forget the environmental impact of car washing, which drains water reserves and spills pollutants into endangered wetlands. If only our cars would clean themselves.
Thanks to some researchers at the Eindhoven University of Technology in the Netherlands, we may be closer to a perpetually polished Prius. The scientists didn't invent a brand-new nanotechnology. Instead, they took an existing water-resistant product, already in use on some vehicles, and made it better. The original coating worked because it came embedded with nanocapsules in its surface. Those tiny capsules both repelled water and contained cleaning agents or paint droplets so that when they were ruptured, say by a key scratch, they released their contents and "healed" the blemish. Unfortunately, the capsules had a limited shelf life. To extend the self-cleaning/healing properties of the coating, the Dutch scientists have redesigned its nanostructure so that the capsules reside on stalks. When one capsule/stalk combination gets disturbed, another underlying stalk rises up and orients itself at the surface to restore the factory finish.
Cars armed with this new coating will require little more than a good rain to wash away dirt and grime. And bird droppings splashed across your door or hood may be a thing of the past.
Retailers aren't the only people who look forward to the day after Thanksgiving. Apparently, plumbers also love Black Friday, which, according to at least one source, is prime time for clogged pipes in the bathroom and kitchen [source: Henkenius]. While that peculiar relationship seems a bit mysterious (although we're sure Uncle Fred has something to do with it), the hows and whys of clogs have been known for years. They begin when a small amount of debris clings to the inside of a pipe and then acts as a nucleus upon which other material collects. For example, if you empty grease into the kitchen sink, grease sticks to the sides of the pipe and food particles stick to the grease. As the obstruction grows over time, water backs up behind the blockage.
In the house of the future, all pipes will be lined with a frictionless coating. This will prevent debris from sticking and should make clogs practically nonexistent. Many commercial enterprises have already invested in similar technology. Chemical manufacturers, for example, commonly use tubing lined with polytetrafluoroethylene, or PTFE. You may recognize PTFE by its more common brand name -- Teflon, the same material coating your nonstick pots and pans. When used in pipes and tubing, PTFE prevents fouling and clogs. It also minimizes fluid resistance, which makes manufacturing environments much more efficient.
Until you can get Teflon-lined pipes in your house, it may be best to send Uncle Fred packing. Or stock up on plungers and chemical drain cleaners.
Unless you own a seafaring vessel, you probably don't lose much sleep over barnacles. But for navies, marinas and commercial fishing boats, it's a serious concern. A 2011 study conducted by researchers at the United States Naval Academy found that biofouling -- that's the fancy term used to describe what happens when the small saltwater crustaceans adhere to a hull or propeller and decrease the vessel's efficiency -- costs the Navy $56 million per year or $1 billion over 15 years [source: Schultz]. And that's just for one class of ships -- the Arleigh Burke-class guided missile destroyers.
Most of those costs involve a cleaning and painting process that's been around for centuries. First, the ship is placed in dry dock, then workers scrape the barnacles from the hull and propeller blades. Finally, they treat exposed surfaces with paint containing tin or copper. The metals in the paint are toxic to barnacle larvae, preventing them from settling down and finding a permanent home. But the paint wears off over time, which means ships must be cleaned repeatedly over their lifetimes.
Luckily, scientists have found what may be a better approach. After learning that barnacles prefer smooth surfaces, they created a micro-textured material containing tiny peaks and valleys ranging in size from 1 to 100 micrometers. Then they exposed the material to barnacle-filled seawater to measure how much attachment took place. They found that when the topography of the surface texture remained in the 30 to 45 micrometer range, barnacle settlement and attachment was reduced by 92 percent compared to smooth surfaces [source: Berntsson]. The research may lead to the first nonstick, barnacle-busting ship of the future.
If you're a gum lover, especially one who lives in the concrete jungle of any major city, chew on this: Every time you spit a piece of the gooey stuff onto the ground, you end up paying for it in the form of higher taxes. That's right, scraping discarded gum from sidewalks and streets requires chemicals, steam cleaners, power washers and operators to do the dirty work. In Charleston, S.C., the city spends $200 a month just to keep three utility poles in its City Market district free of wayward wads. And in Ocean City, Md., two city employees spend three weeks every fall cleaning the sidewalks in a 14-block area near the boardwalk [source: Bryant]. It's not a new problem, either. In 1939, as part of Mayor La Guardia's campaign against gum, more than 20,000 wads of sticky stuff were removed from one spot in Times Square [source: Stead].
One U.K.-based polymer company -- Revolymer -- is working to make this particular problem a thing of the past. Its scientists have created a revolutionary gum, Rev7, that can be easily removed from a range of surfaces, including paved sidewalks, carpets, textiles and clothing. To give Rev7 its nonstick properties, the company adds a chemical to the gum base that is both hydrophilic (water-loving) and hydrophobic (water-hating or oil-loving). The polymer's affinity for oil makes the gum soft and pliable, but its attraction to water means the gum always has a film of water around it, even when it's not in someone's mouth. It's this film of water that allows someone to peel Rev7 away from any surface.
Not that this gives you an excuse to spit out your gum wherever and whenever you wish. Miss Manners suggests that all gum, even the frictionless type, should be disposed of properly.
Want to swim like a shark? Then you have to have skin like a shark. That seems impossible, but if you don a high-tech bodysuit, like the LZR Racer from Speedo, then you're a step closer. The suit uses polyurethane panels to trap air and compress the body to increase buoyancy suit and reduce drag. But that's just the beginning. The fabric of the LZR Racer is coated with hydrophobic nanoparticles that actually repel water and decrease friction along the swimmer's body. After such bodysuits were introduced just before the 2000 Olympics in Sydney, Australia, competitive swimmers went on to break many world records, leading to their eventual ban in the London 2012 Olympics [source: Dorey].
Eventually, even better suits may be possible -- and they may look more and more like real shark scales, which are ribbed with longitudinal grooves. This rough surface reduces eddy formation along the body of a swimming shark, allowing them to glide through the water like a nearly frictionless missile. Speedo continues to experiment with shark-inspired textures to advance the design of its swimsuits, even if Olympic athletes will never get to wear them in competition. That shouldn't stop you, however, from slipping into a second skin and blowing away the competition in the local pool.
According to recent research, old books smell a lot like chocolate and coffee, thanks to certain chemical compounds. Learn more at HowStuffWorks.
Author's Note: 10 Crazy Uses for Completely 'Frictionless' Surfaces
Remember Clark W. Griswold from National Lampoon's "Christmas Vacation": "This is the new non-caloric, silicon-based kitchen lubricant my company's been working on. It creates a surface 500 times more slippery than any cooking oil." Clark rubs the lubricant on his saucer-sled and proceeds to rocket down a snowy hill like a prat out of hell. We were looking for similar, albeit a little less wacky, solutions to round out this article.
- Ames, Heide. "Biofilms: Getting dangerous slime out of your hospital." Healthcare Purchasing News. July 2010. (Dec. 16, 2012) http://www.hpnonline.com/ce/pdfs/1007cetest.pdf
- Barak, Sylvie. "Hi-tech swimsuits banned at London Olympics." EE Times. July 3, 2012. (Dec. 16, 2012) http://www.eetimes.com/electronics-blogs/other/4376640/Hi-tech-swimsuits-banned-at-London-Olympics-
- BBC News. "Science plans 'non-stick' submarine." Oct. 10, 2003. (Dec. 16, 2012) http://news.bbc.co.uk/2/hi/technology/3178136.stm
- Berntsson KM, Johnsson PM, Lejhall M and Gatenholm P. "Analysis of behavioural rejection of micro-textured surfaces and implications for recruitment by the barnacle Balanus improvises." Journal of Experimental Marine Biology and Ecology. Aug. 23, 2000. (Dec. 16, 2012) http://www.ncbi.nlm.nih.gov/pubmed/10958901
- "Biomimicking Sharks." Biomimicry Institute. (Dec. 16, 2012) http://biomimicryinstitute.org/home-page-content/home-page-content/biomimicking-sharks.html
- "Breaking the Ice: GE Global Research Scientists Achieve New Anti-Icing Breakthrough With Nanotechnology." GE Reports. March 6, 2012. (Dec. 16, 2012) http://www.gereports.com/breaking-the-ice/
- Bryant, Dawn. "Myrtle Beach grapples with gooey, gripping problem." Myrtle Beach Online. Jan. 31, 2011. (Dec. 16, 2012) http://www.myrtlebeachonline.com/2011/01/31/1953263/gum-sticks-it-to-city.html
- Dorey, Emma. "Does nanotechnology offer athletes more than a sporting chance?" The Guardian. May 8, 2012. (Dec. 16, 2012) http://www.guardian.co.uk/nanotechnology-world/does-nanotechnology-offer-athletes-more-than-a-sporting-chance
- Evans, Jon. "Pitcher plant inspires ultimate non-stick surface." Royal Society of Chemistry. Sept. 22, 2011. (Dec. 16, 2012) http://www.rsc.org/chemistryworld/News/2011/September/22091101.asp
- Fahl, Daniel E. "Airplane deicing: The how and why." CNN Travel. Dec. 22, 2010. (Dec. 16, 2012) http://articles.cnn.com/2010-12-22/travel/airplane.deicing_1_deicing-fluid-anti-icing-ice-formation?_s=PM:TRAVEL
- "FAQs." Official LiquiGlide Site. (Dec. 16, 2012) http://www.liqui-glide.com/
- Henkenius, Merle. "How to Clear Any Clogged Drain." This Old House. (Dec. 16, 2012) http://www.thisoldhouse.com/toh/photos/0,,20360498,00.html
- Johnson, R. Colin. "True nonstick polymer eliminates mechanical friction." EE Times. Jan. 8, 2011. (Dec. 16, 2012) http://eetimes.com/electronics-news/4166269/True-nonstick-polymer-eliminates-mechanical-friction
- Kaydee. "The Crash of Flight 3407: Better Deicing Needed?" Engineering Ethics Blog. Feb. 16, 2009. (Dec. 16, 2012) http://engineeringethicsblog.blogspot.com/2009/02/crash-of-flight-3407-better-deicing.html
- Morelle, Rebecca and Liz Seward. "'Virtually non-stick' gum created." BBC News. Sept. 13, 2007. (Dec. 16, 2012) http://news.bbc.co.uk/2/hi/science/nature/6993719.stm
- Newcomb, Doug. "Researchers Developing Self-Cleaning Coating for Cars." Wired. Jul. 24, 2012. (Dec. 16, 2012) http://www.wired.com/autopia/2012/07/self-cleaning-paint/
- "New Materials May Help Prevent Infections by Blocking Initial Bacterial Attachment." Newswise. Oct. 26, 2012. (Dec. 16, 2012) http://www.newswise.com/articles/new-materials-may-help-prevent-infections-by-blocking-initial-bacterial-attachment
- Novak, Tim. "Graffiti removal slower in Chicago after budget cuts." Chicago Sun-Times. Aug. 23, 2012. (Dec. 16, 2012) http://www.suntimes.com/news/crime/14611275-418/graffiti-removal-slower-in-chicago-after-budget-cuts.html
- Pike, John. "Polymer Drag Reduction." GlobalSecurity.org. (Dec. 16, 2012) http://www.globalsecurity.org/military/world/ssn-drag-reduction-polymer.htm
- "Rapid Removal." GraffitiHurts. (Dec. 16, 2012) http://www.graffitihurts.org/rapidremoval/removal.jsp
- "Removability of Rev7 Gum." Rev7 Gum Site. (Dec. 16, 2012) http://www.rev7gum.com/removability.php
- Schultz MP, Bendick JA, Holm ER and Hertel WM. "Economic impact of biofouling on a naval surface ship." Biofouling. Jan. 27, 2011. (Dec. 16, 2012) http://www.ncbi.nlm.nih.gov/pubmed/21161774
- Stead, Deborah. "Out, Damned Spot." The New York Times. Jan. 26, 2003. (Dec. 16, 2012) http://www.nytimes.com/2003/01/26/nyregion/out-damned-spot.html?pagewanted=all&src=pm