How Bicycles Work

By: Marshall Brain
Extreme Sports Image Gallery

Bicycles are more than a mode of transportation -- they are a lot of fun.
Lawrence Lawry/extreme sports pictures.

Bicycl­es are simple and beautifully elegant machine­s that attract just about every kid at an early age, working their wa­y up from tricycles and training wheels.

The coolest thing about a bicycle is that it lets you get where you are going a­ lot faster and using a lot less energy than if you were walkin­g or running.

Up Next
  • Bicycle Quiz
  • How to Repair a Bicycle
  • Mountain Bikes
  • PlanetGreen.com: Light Up Your Bike for Safe Riding
­

Another neat thing about bicycles for anyone interested in machines and mechanics is that everything is completely exposed. There are no covers or sheet metal hiding ­any of the working parts that propel you down the road -- on a bicycle, it is all out in the open. Many kids with mechanical tendencies can't resist the desire to break out the tool set and take their bike apart!

In this article, we will look at all of the different parts of a bicycle so that you can completely understand how this machine works!

Advertisement

Bicycle Parts

In order to talk about bicycles, it's good to start by naming all of the parts. Here's a picture of a typical bicycle:

Bicycle Image Gallery

bicycle
Bicycles were first introduced in 19th-century Europe. See more bicycle pictures.

Bicycles are made of just a few parts that you can immediately see and identify. The core is the frame. A bicycle's frame is made of metal tubes welded together. Each tube has a name, as shown here:



  • The front fork is the movable part of the frame that holds the front wheel.
  • The wheels - The wheels are made of a hub, the spokes, the metal rim and the rubber tire.
  • The seat and seat post
  • The handlebars and the handlebar stem that connects the handlebars to the frame
  • The cranks and the pedals
  • The brakes, consisting of the actuators on the handlebars, the brake cable, the brake calipers and the brake pads
  • The chain and gears, consisting of the front chain wheels, the rear freewheel, the front and rear derailleur, the shift levers on the handlebars and the cables

That is all there is to a bicycle!

Advertisement

Bicycle Bearings

Bicycles use ball bearings to reduce friction. You can find ball bearings in:

  • The front and rear hubs for the wheels
  • The bottom bracket, where an axle connects the two pedal cranks together
  • The fork tube, where the handlebars are allowed to turn
  • The pedals
  • The freewheel, where they do double-duty (In the freewheel, they also help provide the one-directional feature.)

The bearings in the fork tube are typical and are shown in the following figure:



The ball bearings (yellow) ride in a cup (red). The cones (dark blue) screw onto the light blue tube that is attached to the fork. The cones are adjusted to be tight enough that there is no play in the fork, but not so tight that they squeeze the ball bearings and cause them to bind. The wheel hubs and pedals work exactly the same way, with the cones providing the adjustment. In the crank axle, one of the cups provides the adjustment instead of the cones. A little bit of grease in the bearings makes them even smoother.

Periodically, you have to disassemble the bearings on a bicycle to clean out the dirt and put in fresh grease. Some more expensive bicycles have sealed bearing cartridges that never need adjustment or lubrication.

Advertisement

Bicycle Gears


You have probably seen a picture of the funny-looking "penny-farthing" or "high-wheeler" bicycles -- the ones with a huge front wheel and a tiny rear wheel. You might even have seen someone riding one in a parade or in a movie. These bicycles became popular starting in 1870, but by the turn of the century were replaced by the "safety bicycle." A bicycle from 1900 or 1910 looks almost exactly like any bicycle you see today. Today's bicycles have two wheels of the same reasonable size, a pair of pedals in the middle of the bike and then a chain that connects the pedals to the rear wheel.

So why did penny-farthing bicycles ever exist? In a penny-farthing bicycle, the pedals and the front wheel are directly connected just like they are on a kid's tricycle. That means that when you turn the pedals one time, the wheel goes around one time. That's an inexpensive way to build a bicycle, but it has a problem. Think about a kid's tricycle. The front wheel might be 16 inches (40 cm) in diameter, or 16 * 3.14 = 50 inches (127 cm) in circumference. That means that each time a kid on a tricycle pedals through one revolution of the front wheel, the tricycle moves forward 50 inches (127 cm). Let's say that the kid is turning the front wheel at 60 rpm, or one revolution per second. That means that the tricycle is moving forward 50 inches per second. That is only 2.8 miles per hour (4.5 kph). If the kid pedals twice as fast, at 120 rpm, the trike is moving at just over 5 miles per hour (9 kph), and the kid looks like his legs are about to spin off because 120 rpm is a lot of pedaling!

If an adult wants to ride a tricycle at a reasonable speed, maybe 15 mph (24 kph), and if the adult does not want his or her legs to fly off, then the tricycle's front wheel has to be pretty big. If the adult wants to pedal at 60 rpm, the front wheel needs to be 84 inches in diameter -- that's 7 feet (more than 2 meters) in diameter!

The first thing that causes bicycles to have gears is the fact that gears can reduce the wheel size from 7 feet in diameter to something reasonable. As described in the article How Gears Work, gears and gear ratios are a good solution to this problem. For example, if you put a gear with 42 teeth on the front chain wheel and a smaller gear with 14 teeth on the rear wheel, you have a 3-to-1 gear ratio. Now the back wheel can be 84 inches / 3 = 28 inches (71 cm) in diameter -- about the size of a normal bicycle wheel. This is a much safer approach.

Advertisement

Bicycle Gear Ratios

The idea behind multiple gears on a bicycle -- whether it's an older "10-speed" bike or a modern gear ratio on the bike might be a front chain wheel with 22 teeth and a rear gear having 30 teeth. That means that the gear ratio is 0.73-to-1. For each pedal stroke, the rear wheel turns 0.73 times. In other words, for each pedal stroke, the bike moves forward about 60 inches (about 3.4 mph / 5.4 kph at a 60-rpm pedaling rate). The "highest" gear ratio on the bike might be a front chain wheel with 44 teeth and a rear gear having 11 teeth. That creates a 4-to-1 gear ratio. With 26-inch wheels, the bike moves forward 326 inches with each pedal stroke. At a 60-rpm pedaling rate, the speed of the bike is 18.5 mph (30 kph). By doubling the pedaling rate to 120 rpm, the bike has a maximum speed of 37 mph (60 kph). A range of 3.4 mph to 37 mph is fantastic, and it lets the rider climb the steepest hill very slowly or race almost as fast as a car! That is why a bike has gears.

The gears at the front are called the chain wheels. Most bikes have two or three chain wheels that look like this:

chain wheel

Attached to the rear wheel is the freewheel, which looks like this:

bicycle

The freewheel has between five and nine gears on it, depending on the bike. A freewheel spins freely in one direction and locks in the other. That allows the rider to either pedal or not pedal -- when not pedaling, the bike coasts (another feature that tricycles and penny-farthing bicycles lack).

To change the gears, a bicycle has front and rear derailleurs. Here's a shot of the rear derailleur:

derailleur

The rear derailleur has two small cogs on it that both spin freely. The purpose of the arm and lower cog of the derailleur is to tension the chain. The cog and arm are connected to a spring so that the cog pulls backward at all times. As you change gears, you will notice that the angle of the arm changes to take up or let out slack:

bicycle arm

The top cog is very close to the freewheel. When you adjust the gears with the lever on the handlebar, this cog moves to a different position on the freewheel and drags the chain with it.

cog

The chain naturally slips from one gear to the next as you turn the pedals.

Everything about a bicycle is simple. That's what makes it such a great machine to ride -- and also a great mechanical work of art! For more information on bicycles and related topics, check out the links on the next page.

­

Advertisement

Lots More Information

Related Articles

  • Bicycle Quiz 
  • How to Repair a Bicycle
  • How Gears Work
  • How Gear Ratios Work
  • How Bearings Work
  • How Odometers Work
  • How Segways Work

More Great Links

  • Pedaling History Bicycle Museum
  • CaptainBike.com - huge list of articles
  • The Exploratorium's Science of Cycling
  • Bikelane.com - extensive list of cycling links
  • Pedal Magic

Advertisement

Loading...